MSTP would probably be the best on both the cisco and the Juniper... It is a standards based protocol where Cisco's pvst and rapid-pvst are proprietary
Luca -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Saba Sumsam Sent: Saturday, 10 November 2012 4:58 PM To: [email protected] Subject: [j-nsp] STP Between Cisco and Juniper Hi, I have a Layer 2 network consisting of a Cisco 2970G, SRX210 and SRX100. Following are the STP modes supported on each: Cisco 2970G: mst, pvst, rapid-pvst Juniper SRX100: STP, RSTP. MSTP Juniper SRX210: STP, RSTP My question is: Is Cisco mst interoperable with Juniper RSTP. What mode should I be using on each device in this case? Suggestions highly appreciated. Regards. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
