Saba, I have not tried this myself but after being bitten by Foundry vs Juniper spanning tree issues; I would highly recommend testing this in a lab environment before deploying it. I also agree with Jonathan that rstp would be the logical approach if you do not have to deploy MST.
HTH, Graham On 10 November 2012 05:57, Saba Sumsam <[email protected]> wrote: > Hi, > I have a Layer 2 network consisting of a Cisco 2970G, SRX210 and SRX100. > Following are the STP modes supported on each: > > Cisco 2970G: mst, pvst, rapid-pvst > Juniper SRX100: STP, RSTP. MSTP > Juniper SRX210: STP, RSTP > > My question is: Is Cisco mst interoperable with Juniper RSTP. What mode > should I be using on each device in this case? > > Suggestions highly appreciated. > > Regards. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Graham Brown Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer> LinkedIn <http://www.linkedin.com/in/grahamcbrown> _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
