Hi Saku, Actually I am working on migration from Cisco to Juniper. On Cisco router weight attribute is used and have to set same preference same on Juniper.
Thats where I found that there is no weight in Juniper. Good to know some thing :). Regards, *Ali Sumsam CCIE* *Network Engineer - Level 3* eintellego Pty Ltd [email protected] ; www.eintellego.net Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)410 603 531 facebook.com/eintellego PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM On Sun, Nov 25, 2012 at 9:03 PM, Saku Ytti <[email protected]> wrote: > On (2012-11-25 19:03 +1100), Ali Sumsam wrote: > > > I am configuring BGP for one of my customer's MX-5 router. I need to > > configure the BGP attribute "weight" > > There is no BGP attribute 'weight' it's Cisco proprietary hinvention. What > are you trying to accomplish where you think you need to set weight in > JunOS? > > > I googled it and found following, which kinda says that we cant play with > > weight attribute in policies. Is this correct? > > > > > http://www.juniper.net/techpubs/software/erx/erx41x/swconfig-routing-vol2/html/bgp-config9.html > > This is ERX, which is much closer to IOS than JunOS. > > -- > ++ytti > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
