----- Original Message -----
From: <[email protected]>
I can understand the choice of not including this functionality. Juniper
can avoid the well known of problem of pointing a default route at an
Ethernet interface, leading to an ARP for every new/unknown destination.
There is a recent post on this board describing this exact problem with "ARP
for every new/unknown destination"
https://puck.nether.net/pipermail/juniper-nsp/2012-November/024826.html
However, the original issue - 0/0 pointing to DHCP default-router - is
scriptable easily enough in SLAX.
Should you go this route, make sure your provider has ARP policer in place
to withstand a routing loop in your network :-)
HTH
Rgds
Alex
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
