mhhh... why you say it ? Indeed there is a media converter (fiber to copper), but do you think that could be the problem ?
> Subject: Re: [j-nsp] LLDP on LAG behaviour > From: [email protected] > Date: Wed, 27 Mar 2013 08:54:45 +1000 > CC: [email protected]; [email protected] > To: [email protected] > > At the risk of asking the obvious - are the devices directly connected, or is > there interim equipment in the path (media converters, NTUs etc) > > On 26/03/2013, at 5:30 PM, Riccardo S <[email protected]> wrote: > > > SIDE A > > > > @xx> show lldp statistics > > Interface Parent Interface Received Unknown TLVs With Errors > > Discarded TLVs Transmitted Untransmitted > > ge-1/0/1.0 ae0.0 36006 0 0 0 > > 40028 0 > > > > SIDE B > > > > @yy> show lldp statistics > > Interface Parent Interface Received Unknown TLVs With Errors > > Discarded TLVs Transmitted Untransmitted > > ge-1/0/1.0 ae0.0 0 0 0 0 > > 36011 0 > > > > > > I saw it before, but it's strage since I do not guess that lldp pkt can be > > filtered (I've BGP peering between two sites). > > > > Sometimes line flap and BGP goes down, but when it's up the line (and BGP) > > I expect to have lldp neighbor up. > > > > tks > > > > > > From: [email protected] > > Date: Mon, 25 Mar 2013 09:22:46 -0500 > > Subject: Re: [j-nsp] LLDP on LAG behaviour > > To: [email protected] > > CC: [email protected] > > > > What does "show lldp statistics" show for the interfaces connected to each > > other? > > > > On Mon, Mar 25, 2013 at 3:01 AM, Riccardo S <[email protected]> wrote: > > > > > > > > > > > > junos 11.4r5.7 > > > > Tks > > > > From: [email protected] > > Date: Sun, 24 Mar 2013 21:59:01 -0500 > > > > > > Subject: Re: [j-nsp] LLDP on LAG behaviour > > To: [email protected] > > CC: [email protected] > > > > > > > > What version Junos? I ran into some LLDP bugs on early 11.4 versions. > > > > On Wed, Mar 13, 2013 at 5:45 AM, Riccardo S <[email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > I’ve a couple of EX in VC configuration > > > > mode (same Junos) connected with two links in LAG mode and LLDP switched-on > > on the > > > > aggregate interface. > > > > > > > > The problem is that on one VC I see > > > > lldp neighborship with the other, on the other nothing… > > > > > > > > Any idea ? > > > > > > > > > > > > > > > > 4200A# run show lldp neighbors > > > > > > > > Local Interface Parent Interface Chassis Id Port info > > System Name > > > > > > > > ge-1/0/1.0 ae0.0 54:e0:31:32:bd:c0 ge-1/0/1.0 > > 4200B > > > > > > > > {master:0}[edit protocols] > > > > > > > > > > > > > > > > 4200B# run show lldp neighbors > > > > > > > > {master:0}[edit protocols] > > > > Tks > > > > > > > > > > > > > > > > _______________________________________________ > > > > juniper-nsp mailing list [email protected] > > > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > > > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
