Sorry but im having a hard time understanding this thread ...
- So your getting lldp neig adj on ONE link but not the other?
-- are both links using a media convertor? if so, have you checked
settings on both devices? normally they well have jumpers are set properly
-- what do your configurations for both ports look like?
Anytime you introduce a media converter there is always room for problems
On 13-03-27 12:24 AM, Riccardo S wrote:
mhhh... why you say it ?
Indeed there is a media converter (fiber to copper), but do you think that
could be the problem ?
Subject: Re: [j-nsp] LLDP on LAG behaviour
From: [email protected]
Date: Wed, 27 Mar 2013 08:54:45 +1000
CC: [email protected]; [email protected]
To: [email protected]
At the risk of asking the obvious - are the devices directly connected, or is
there interim equipment in the path (media converters, NTUs etc)
On 26/03/2013, at 5:30 PM, Riccardo S <[email protected]> wrote:
SIDE A
@xx> show lldp statistics
Interface Parent Interface Received Unknown TLVs With Errors Discarded
TLVs Transmitted Untransmitted
ge-1/0/1.0 ae0.0 36006 0 0 0
40028 0
SIDE B
@yy> show lldp statistics
Interface Parent Interface Received Unknown TLVs With Errors Discarded
TLVs Transmitted Untransmitted
ge-1/0/1.0 ae0.0 0 0 0 0
36011 0
I saw it before, but it's strage since I do not guess that lldp pkt can be
filtered (I've BGP peering between two sites).
Sometimes line flap and BGP goes down, but when it's up the line (and BGP) I
expect to have lldp neighbor up.
tks
From: [email protected]
Date: Mon, 25 Mar 2013 09:22:46 -0500
Subject: Re: [j-nsp] LLDP on LAG behaviour
To: [email protected]
CC: [email protected]
What does "show lldp statistics" show for the interfaces connected to each
other?
On Mon, Mar 25, 2013 at 3:01 AM, Riccardo S <[email protected]> wrote:
junos 11.4r5.7
Tks
From: [email protected]
Date: Sun, 24 Mar 2013 21:59:01 -0500
Subject: Re: [j-nsp] LLDP on LAG behaviour
To: [email protected]
CC: [email protected]
What version Junos? I ran into some LLDP bugs on early 11.4 versions.
On Wed, Mar 13, 2013 at 5:45 AM, Riccardo S <[email protected]> wrote:
I’ve a couple of EX in VC configuration
mode (same Junos) connected with two links in LAG mode and LLDP switched-on on
the
aggregate interface.
The problem is that on one VC I see
lldp neighborship with the other, on the other nothing…
Any idea ?
4200A# run show lldp neighbors
Local Interface Parent Interface Chassis Id Port info
System Name
ge-1/0/1.0 ae0.0 54:e0:31:32:bd:c0 ge-1/0/1.0
4200B
{master:0}[edit protocols]
4200B# run show lldp neighbors
{master:0}[edit protocols]
Tks
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
