I think you'll need at least an M20 for your 10 GigE requirement as well as SDH.
If you can somehow get a different transit circuit than your SDH one, an MX5 would be a much closer (throughput-wise) and better bang-for-your-buck replacement for a 7206 than an M-series. J-series with a T1 module could also work, depending on your "STM-1". If you need SDH though, you'll need M or T. J can do T1s. --j On Tue, Apr 9, 2013 at 6:28 PM, Orlando Cordova Gonzales < [email protected]> wrote: > hello, > > I need to change a CISCO 7206 router that computer I recommend one of the > requirements is that you have two 10G interfacez two interfacez 1G and STM1 > interface to connect with the ISP was thinking M10i Router but I do not > support 10g interface. > > thank you very much for your help. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
