Dear All
We have one juniper M7i with RE-850 routing engine and with one 1x G/E, 4x
1GE(LAN), IQ2E PIC with Enhanced CFEB.
Version: 11.2R3.3
For last few weeks we are observing high latency and as result slow browsing
issue for the same.
Interface details: ge-0/0/0 link-to-ISP1 avg.
input BW 135Mbps
ge-0/0/1
link-to-switch(aggregated port - 1) avg. input BW 450 Mbps and avg.
out BW 150 Mbps
ge-0/0/2
link-to-ISP2 avg. input BW 250 Mbps
ge-0/0/3
link-to-switch(aggregated port - 2) avg. input BW 450 Mbps and avg.
out BW 150 Mbps
ge-1/3/0
link-to-ISP3 avg. input BW 550 Mbps and avg. out BW 300 Mbps
as checked router load average is also OK.
Load averages: 1 minute 5 minute 15 minute
0.00 0.06 0.05
What could be the issue? Please help us to sort out the issue...
Thanks in advanced.
Thanks & Regards,
Abdullah Mullick
________________________________
This communication contains confidential or legally privileged information. The
material, data, information, theme, ideas, stories, concepts, abstracts, notes,
etc. (Proprietary Information) contained in this communication is the sole and
exclusive property of Siticable Network Limited and form part of this
communication solely for the discussion with the addressee. The Proprietary
information contained in this communication may be used only in the manner and
for the purposes as may be expressly permitted by Siticable Network Limited. If
you are not the intended recipient and have received this Proprietary
Information in error, please notify us immediately by responding to this by
post/email and delete it from your records. Any use, utilization dissemination,
distribution or copying of this Proprietary Information without proper
authorization by us is strictly prohibited. Damages merely shall not be a
sufficient remedy for violation of the aforesaid and we are entitled to th!
e remedies by way of injunction, specific performance and other equitable
relief for any breach of the above in addition to any other remedies available
to us at law or in equity(c) 2008. Siticable employs every reasonable
precaution to minimize risk arising from virus and malware, and ensure
virus-free communication. However we cannot accept liability for any damage
which may arise as a result of software viruses. Recipients are strongly
advised to employ powerful and updated virus checks at their end. All rights
reserved with Siticable Network Limited.
www.siticable.com
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
