> -----Original Message----- > From: juniper-nsp [mailto:[email protected]] On Behalf > Of Abdullah Al Faruque Mullick > Sent: Friday, June 14, 2013 10:56 AM > To: [email protected] > Subject: Re: [j-nsp] Getting High Latency and Slow browsing Issue in > Juniper M7i with RE-850 > > Hi > > > Can anyone help me to sort out the issue or could tell me how to proceeds > or how much traffic can m7i handle???? > > > Please help me as I not getting anything wrong in M7i but in peak we are > getting high latency and slow browsing issue.... > > Thanks in advanced...
While it's somewhat difficult to work out how much bandwidth each port is forwarding, due to the message formatting, you should be aware that the 4-port IQ2 PIC is oversubscribed 4:1. You can only get a total of 1Gb/s full-duplex through that PIC, so if one is receiving 450Mb/s, another is receiving 350Mb/s and another is receiving 450Mb/s, you are way oversubscribed on that PIC. -evt _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
