Hi Phil, what is the Cisco model & IOS?
Did you create the vlan in the vlan database in your Cisco switch? :) Maybe try switchport nonegotiate... Le 24 juil. 2013 à 17:39, Phil Mayers <[email protected]> a écrit : > On 24/07/13 16:07, Phil Mayers wrote: >> On 24/07/13 15:48, Stacy W. Smith wrote: >>> In general, I see no problems with your AE configuration. >>> >>> Could you define "never comes up"? Is it the ae0 interface, or the >>> ae0.999 unit that is in a down state? >> >> >> Both (see below) > > Interestingly, this comes up if you use "sub-ints" on the Cisco side: > > interface port-channel20 > > interface port-channel20.999 > encapsulation dot1q 999 > ip address 192.168.1.1/31 > no shutdown > > ...as opposed to > > interface port-channel20 > switchport > switchport mode trunk > switchport trunk allowed vlan 999 > > int Vlan999 > ip address 192.168.1.1/31 > no shutdown > > Clearly there's some sort of LACP-layer parameter that corresponds to "trunk" > versus "not" - can this be influenced by the specific "style" of ae0 config > on the SRX side? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
