Not exactly. allocate global host-routes will allocate a label for any /32 prefix. While this should only be your loopbacks, it will catch any /32 route including static routes etc...
Darren http://www.mellowd.co.uk/ccie > From: [email protected] > To: [email protected] > Date: Thu, 15 Aug 2013 12:42:09 -0400 > Subject: Re: [j-nsp] Mixed Cisco/Juniper MPLS network > > > -----Original Message----- > > From: juniper-nsp [mailto:[email protected]] On Behalf > > Of Mark Tinka > > Sent: Thursday, August 15, 2013 12:04 PM > > To: [email protected] > > Cc: Saku Ytti > > Subject: Re: [j-nsp] Mixed Cisco/Juniper MPLS network > > > > If Cisco had a command that implemented the Junos behaviour, > > e.g,., "mpls ldp label allocation loopbacks-only" without > > needing to tinker around with filters, I'd be the first one > > to implement it :-). > > > > Mark. > > Isn't this what the aforementioned "allocate global host-routes" command > does? We do run this command on our ME3600s, but we also do filtering. > > -evt > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
