Jeremy Schulman has put together some ansible playbooks that will let you do exactly that, as well as various config pushing bits:
https://github.com/jeremyschulman/ansible-junos-demo Frank Sweetser fs at wpi.edu | For every problem, there is a solution that Manager of Network Operations | is simple, elegant, and wrong. Worcester Polytechnic Institute | - HL Mencken On 9/19/2013 6:04 PM, Mick Burns wrote:
Hey all, I am looking for ideas/previous experience in the best way to automate the upgrade of multiple (let's say about a hundred units) EX switches in large datacenters. Let's assume here they are a mix of 3200 and 4200 and all of them runs the same JunOS release. Any failure must be quickly identified for a manual upgrade. Any help or advice is much appreciated. Mick B. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
