Thanks to all who answered, your contribution is welcome. This is exactly the kind of hints that I was looking for.
Cheers, Mick On Fri, Sep 20, 2013 at 7:12 AM, Frank Sweetser <[email protected]> wrote: > > Jeremy Schulman has put together some ansible playbooks that will let you > do exactly that, as well as various config pushing bits: > > https://github.com/**jeremyschulman/ansible-junos-**demo<https://github.com/jeremyschulman/ansible-junos-demo> > > Frank Sweetser fs at wpi.edu | For every problem, there is a solution > that > Manager of Network Operations | is simple, elegant, and wrong. > Worcester Polytechnic Institute | - HL Mencken > > On 9/19/2013 6:04 PM, Mick Burns wrote: > >> Hey all, >> >> I am looking for ideas/previous experience in the best way to automate the >> upgrade of multiple (let's say about a hundred units) EX switches in large >> datacenters. Let's assume here they are a mix of 3200 and 4200 and all of >> them runs the same JunOS release. Any failure must be quickly identified >> for a manual upgrade. >> >> Any help or advice is much appreciated. >> Mick B. >> ______________________________**_________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp> >> >> ______________________________**_________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
