I've run into a very strange bug on the MX where PPP through a VPLS results in the packets being mangled - affected circuits have been migrated to L2VPNs. Although a fix is provided in 12.3R4 which we are currently testing - I'll dig out the PR when I get into the office.
Graham Brown Network Engineer Snap Internet Christchurch, New Zealand Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer> LinkedIn <http://www.linkedin.com/in/grahamcbrown> On 24 September 2013 21:46, Mark Tinka <[email protected]> wrote: > On Tuesday, September 17, 2013 04:05:50 PM Adrien Desportes > wrote: > > > Hello William, > > > > Before 13.2 you would have to use an external loop to > > terminate the vpls on one side and the ppp on the other > > side (as lt- interface does not support the proper > > encapsulation for ppp). > > > > Starting 13.2 (that was just released), if you use L2VPN > > rather than VPLS to backhaul your DSLAM VLAN, the below > > feature might do the job w/o consuming ports for the > > external hairpin: > > > > http://www.juniper.net/techpubs/en_US/junos13.2/topics/co > > ncept/pseudowire-subscriber-interfaces-overview.html > > Now I really don't have to have VPLS at all. > > Happy days :-). > > Mark. > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Graham Brown Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer> LinkedIn <http://www.linkedin.com/in/grahamcbrown> _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
