On 24/01/14 00:14, Ali Sumsam wrote: > Hi All, > > I am using a SFP-10GBase-ER for my Cisco3750X for a 10gig link going to a > Juniper MX5-T router (10GE XFP) > > > I am receiving following logs on my Cisco3750X. > > %SFF8472-5-THRESHOLD_VIOLATION: Te1/1/2: Rx power low alarm; Operating > value: -21.3 dBm, Threshold value: -20.0 dBm. > > No logs on Juniper.
You can, and probably should, log this as you would traffic levels via SNMP, at least for longer haul optics. > > Does this mean I have to increase the power on the interface? > Or is there anything else I need to look at? > > Following are the readings from my Juniper router. Those are the thresholds, not the actual power levels involved, what's the full output from "show interfaces diagnostics optics" > Laser rx power high alarm threshold : 1.2589 mW / 1.00 dBm > Laser rx power low alarm threshold : 0.0158 mW / -18.01 dBm > Laser rx power high warning threshold : 1.0000 mW / 0.00 dBm > Laser rx power low warning threshold : 0.0199 mW / -17.01 dBm > > > Regards, > > *Ali Sumsam - *eintellego Networks Pty Ltd > Senior Network Engineer > [email protected] ; www.eintellegonetworks.com > > Phone: 1300 239 038; Cell +61 (0)450 609 592 ; skype://sumsam.ali80 > > facebook.com/eintellegonetworks ; <http://twitter.com/networkceoau> > linkedin.com/in/alisumsam > > > The Experts Who The Experts Call > Juniper - Cisco - Cloud > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Julien Goodwin Studio442 "Blue Sky Solutioneering"
signature.asc
Description: OpenPGP digital signature
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
