Hi,
I have an interesting problem. I have an MX80 where I wish to enable
inline flow sampling. I used the kb entry as a template and configured. When
setting the table size the PFE rebooted which is expected but when it came back
online forwarding stopped. I rebooted again and had the same issue with the
exception of after about 20 minutes forwarding started to work. Looking at the
logs there seemed to be throttles from the kernel to the PFE and issues that
look like ipsec trying to find a phase 2 policy that might have been causing
the delay. However, ipsec isn’t enabled on this box and there is an actual ACL
that should block ipsec sessions from establishing so I think this might be a
false signal. Anyone ever see this sort of long delay or have any ideas where
I should look further. I’ve engaged TAC but am looking for things to test in
the mean time independently. Anyone seen this before or have any ideas?
Thanks
Scott
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
