On Wed, 9 Jul 2014, Scott Granados wrote:
I have an interesting problem. I have an MX80 where I wish to
enable inline flow sampling. I used the kb entry as a template and
configured. When setting the table size the PFE rebooted which is
expected but when it came back online forwarding stopped. I rebooted
again and had the same issue with the exception of after about 20
minutes forwarding started to work. Looking at the logs there seemed
to be throttles from the kernel to the PFE and issues that look like
ipsec trying to find a phase 2 policy that might have been causing the
delay. However, ipsec isn?t enabled on this box and there is an actual
ACL that should block ipsec sessions from establishing so I think this
might be a false signal. Anyone ever see this sort of long delay or
have any ideas where I should look further. I?ve engaged TAC but am
looking for things to test in the mean time independently. Anyone seen
this before or have any ideas?
What version of code are you running? I haven't seen this problem, but I
don't have any MX80s specifically. I haven't seen this behavior on a pair
of MX480s running 12.3R6.6.
I have a pair of MX5s I could test with, but I havne't had a chance to get
them set up in our lab yet.
jms
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
