Colleagues, I have pairs of EX4200 switches connected via third party MUXes. When the actual physical medium goes down, the MUXes do not shutdown their Ethernet interfaces. So I need some sort of point-to-point L2 link fault management between the EX4200s.
I thought OAM could be used for this purpose. However after reading http://www.juniper.net/techpubs/en_US/junos9.4/topics/task/configuration/lfm-ethernet-oam-configuring-ex-series-cli.html and references therein I am a bit confused. I don't need those "remote-loopback" and "allow-remote-loopback" features, profiles and other complicated stuff, do I? All I need from OAM is some kind of L2 keepalive. Do you have a good configuration example? Thanks a lot for any input. -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN sip:[email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
