That looks to be it. I had regular flow monitoring yesterday. Changed to inline this morning and only noticed CPU then. Rolled back to regular, but CPU still at 100% - Looks like I need to restart FPC...
Thanks Darren http://www.mellowd.co.uk/ccie > Subject: Re: [j-nsp] Cosmetic bug? - mx80 12.2r7.7 > From: [email protected] > Date: Thu, 4 Sep 2014 14:24:19 +0200 > To: [email protected]; [email protected] > > Hi Darren, > > do you have inline sampling/Jflow/IPFIX configured ? > If so, you may hit PR671136. > > Olivier > > Le 4 sept. 2014 à 14:02, Darren O'Connor <[email protected]> a écrit : > > > Yes my bad. 12.3R7.7 > > > > Still shows the same. No issues forwarding traffic: > > > > root@mx80> show chassis tfeb > > TFEB status: > > Slot 0 information: > > State Online > > Intake temperature 42 degrees C / 107 degrees F > > Exhaust temperature 58 degrees C / 136 degrees F > > CPU utilization 100 percent > > Interrupt utilization 7 percent > > Heap utilization 18 percent > > Buffer utilization 13 percent > > Total CPU DRAM 1024 MB > > Start time: 2014-08-26 07:22:59 BST > > Uptime: 9 days, 5 hours, 40 minutes, 29 > > seconds > > > > > >> Date: Thu, 4 Sep 2014 12:35:16 +0200 > >> To: [email protected] > >> CC: [email protected] > >> Subject: Re: [j-nsp] Cosmetic bug? - mx80 12.2r7.7 > >> From: [email protected] > >> > >>> I'm running 12.2r7.7 on an MX80 and I'm seeing very high cpu on the tfeb > >>> and fpcs. However when logging into the tfeb the CPU is 'idle' for the > >>> majority of the time. The time reported is 100% though. It's not actually > >>> affecting traffic forwarding. I've logged a jtac case but wondering if > >>> anyone is seeing this. > >>> > >>> root@mx80> show chassis tfeb > >>> TFEB status: > >>> Slot 0 information: > >>> State Online > >>> Intake temperature 42 degrees C / 107 degrees F > >>> Exhaust temperature 57 degrees C / 134 degrees F > >>> CPU utilization 100 percent > >>> Interrupt utilization 7 percent > >>> Heap utilization 18 percent > >>> Buffer utilization 13 percent > >>> Total CPU DRAM 1024 MB > >>> Start time: 2014-08-26 07:22:59 BST > >>> Uptime: 9 days, 50 minutes, 59 seconds > >> > >> Did you mean 12.3R7.7? In that case - not seeing it. From one of our > >> MX80s running 12.3R7.7: > >> > >> x@y> show chassis tfeb > >> TFEB status: > >> Slot 0 information: > >> State Online > >> Intake temperature 45 degrees C / 113 degrees F > >> Exhaust temperature 62 degrees C / 143 degrees F > >> CPU utilization 10 percent > >> Interrupt utilization 2 percent > >> Heap utilization 22 percent > >> Buffer utilization 13 percent > >> Total CPU DRAM 1024 MB > >> Start time: 2014-06-23 00:17:30 CEST > >> Uptime: 73 days, 12 hours, 6 minutes, 53 > >> seconds > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
