Le 04/09/2014 14:02, Darren O'Connor a écrit : > Yes my bad. 12.3R7.7 > > Still shows the same. No issues forwarding traffic: > > root@mx80> show chassis tfeb > TFEB status: > Slot 0 information: > State Online > Intake temperature 42 degrees C / 107 degrees F > Exhaust temperature 58 degrees C / 136 degrees F > CPU utilization 100 percent > Interrupt utilization 7 percent > Heap utilization 18 percent > Buffer utilization 13 percent > Total CPU DRAM 1024 MB > Start time: 2014-08-26 07:22:59 BST > Uptime: 9 days, 5 hours, 40 minutes, 29 > seconds > > Thanks > Darren > http://www.mellowd.co.uk/ccie > > Hi,
If inline jflow is activated you probably hit PR671136 "With Junos 12.3R7, high CPU utilization (100%) will be seen on MPC if inline sampling/Jflow is enabled. The high CPU will affect the MPC's normal tasks. To restore service, try to disable inline sampling/Jflow and then restart affected FPC or whole chassis." 12.3R7-S2 is already correcting this behaviour since early august, and 12.3R8 also taking this in charge had a target realease date on 2 sept .. :) ++ Fabien _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
