Awesome, thank you very much :-)
Both work great!
Scott H.
On 9/9/14, 9:32 PM, Ben Dale wrote:
On 10 Sep 2014, at 7:54 am, Scott Harvanek <[email protected]> wrote:
This is a silly/OCD question;
I've faced this before and I can't recall how it was "prettied" up...
If I recall there is a way to pretty up the formatting of show bgp summary;
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn
State|#Active/Received/Accepted/Damped...
XXX.XXX.XXX.XXX XXXXX 4463666 120866 0 0 5w3d 9:31:20
Establ
inet.0: 272410/510233/510233/0
To remove the line break / fix the table formatting. I've tried adjusting
screen-width with no joy.
Halp?
There's a few ways to neaten it, but it's a case of which information you can
live without:
show bgp summary | except inet
show bgp group summary | match l:
Failing that, I just hacked up an op script to only show a summarised version
from each peer - output here:
https://github.com/dfex/DFEXjunoscripts/blob/master/show-bgp-neat.md
Code here:
https://github.com/dfex/DFEXjunoscripts/blob/master/show-bgp-neat.slax
The script *should* sum all the prefixes from each RIB into a single summarised
number per peer, but I haven't had a chance to test it too thoroughly yet.
Feedback/Pull Requests welcome.
Cheers,
Ben
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
