For me at least, peer column needs to be wider (IPv6!) and duration does too ( less than 1w you get a format like "2d 22:22:40")
On Mon, Sep 22, 2014 at 9:11 PM, Ben Dale <[email protected]> wrote: > > On 23 Sep 2014, at 1:48 pm, Phil Shafer <[email protected]> wrote: > >> Ben Dale writes: >>> Okay, one small caveat to this script - it looks like the use of mutable >>> variables (mvar >>> and set) was only introduced in SLAX 1.1 / Junos 12.2, so it's actually not >>> going to wo >>> rk on older versions of Junos. >>> >>> I know 11.4 is the trusted choice for most people on MX at the moment, so >>> when I get som >>> e time I'll attempt a mind-bending re-write using the older immutable var >>> format. >> >> In this case, you don't need the mvars. Let sum() do the iteration: >> >> for-each ($neighbour-list/bgp-peer) { >> <output> jcs:printf("%-20s%-15s%-12s%-10s%-10s%-10s%-10s%-5s", >> peer-address, >> peer-as, >> peer-state, >> elapsed-time, >> sum(bgp-rib/active-prefix-count), >> sum(bgp-rib/received-prefix-count), >> sum(bgp-rib/accepted-prefix-count), >> description); >> } >> >> Thanks, >> Phil > > Love your work Phil : ) > > That's a heck of a lot simpler/cleaner than the recursive monstrosity I've > been putting together! > > Changes have been pulled into github, so if you're running 11.4 or earlier, > give it another try now. > > Ben > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
