Hi Octavio!
CGNAT on MX can run two mode :
Option 1) an interface (interface-style service-set)
Option 2) a routing next hop (next-hop service-set)
You can check network topology and choose option 1 or option 2.
Thanks!
Best regards,
TRAN QUANG DUNG
Network Engineering
t (84-4) 39 42 71 00 (ext: 128)
f (84-8) 39 42 71 02
m (84) 979423570
Ha noi Rep. Office:
R 307, Sky City Tower A, 88 Lang Ha Str.,
Dong Da Dist., Ha noi, Vietnam
www.svtech.com.vn
-----Original Message-----
From: juniper-nsp [mailto:[email protected]] On Behalf Of
Octavio Alfageme
Sent: Thursday, September 18, 2014 2:26 PM
To: juniper-nsp
Subject: [j-nsp] CGNAT on a MX240 acting as BNG
Hi everyone,
I have several MX240s acting as BNGs for PPPoE subscribers. Due to IPv4
scarcity I need to start running CGNAT on them (both NAT444 and DS-Lite)
with dedicated MS-DPC cards. I've searching for information about this
scenario and I was unable to find it. Do you know if there are restrictions
to run BNG function and CGNAT for these PPPoE subscribers in the same MX240?
Does any of you have MX series routers acting as CGNAT/BNGs in your network?
Thanks in advance
Octavio
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
