Thats correct. You could also monitor on the switch port side of things with snmp
If your going to pay, inmon is a great application. -- Payam Chychi Network Engineer / Security Specialist On Thursday, September 25, 2014 at 7:23 PM, Paul S. wrote: > I'm not 100% sure of this, but I believe ntop/ntopng can only parse > their own Json based flow format. > > So, what you have to do is use nprobe to receive the flows and convert > them, then transmit them to ntop's zmq server.. > > Please also note that nprobe is not free for commercial use. > > On 9/26/2014 午前 08:41, Rodrigo Augusto wrote: > > Hi folks! what do you guys do to monitor customer traffic with ntop and > > sflow?! > > I follow some instructions > > (http://www.gossamer-threads.com/lists/ntop/users/27055) but not have > > success... Does Exist any different version of ntop to collect sflow's on > > ex swichs?! > > I am using ex3300 to send flows to the collector, i see the traffic on > > especific port, but not show any information( src and dst ). > > My switch have simple configuration: > > Port ge-0/0/0 is on access mode with a vlan member and port xe-0/0/0 trunk > > all vlan members. And add sflow to ge-0/0/0... > > > > When i try to see ,nothing show me... > > Enviado via iPhone > > Grupo Connectoway > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
