I recommend the nfsen+nfdump combo, works beautifully.
On 9/26/2014 午後 01:06, Payam Chychi wrote:
Thats correct. You could also monitor on the switch port side of
things with snmp
If your going to pay, inmon is a great application.
--
Payam Chychi
Network Engineer / Security Specialist
On Thursday, September 25, 2014 at 7:23 PM, Paul S. wrote:
I'm not 100% sure of this, but I believe ntop/ntopng can only parse
their own Json based flow format.
So, what you have to do is use nprobe to receive the flows and convert
them, then transmit them to ntop's zmq server..
Please also note that nprobe is not free for commercial use.
On 9/26/2014 午前 08:41, Rodrigo Augusto wrote:
Hi folks! what do you guys do to monitor customer traffic with ntop
and sflow?!
I follow some instructions
(http://www.gossamer-threads.com/lists/ntop/users/27055) but not
have success... Does Exist any different version of ntop to collect
sflow's on ex swichs?!
I am using ex3300 to send flows to the collector, i see the traffic
on especific port, but not show any information( src and dst ).
My switch have simple configuration:
Port ge-0/0/0 is on access mode with a vlan member and port xe-0/0/0
trunk all vlan members. And add sflow to ge-0/0/0...
When i try to see ,nothing show me...
Enviado via iPhone
Grupo Connectoway
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
