I highly suggest always using the normal "show configuration" commands, as
you'd also miss things like this in your lo0.0 filter:
term block-ntp {
from {
protocol udp;
##
## Warning: statement ignored: unsupported platform (ex4550-32f)
##
port ntp;
}
then {
discard;
}
}
^^ and my guys wondered why local DNS requests and SNMP polls didn't work for a
week.......
- Ck.
On 19/02/2015, at 12:12 AM, Dovid Bender <[email protected]> wrote:
> Afaik it never shows in display set because comments aren't entered with set.
>
> Regards,
>
> Dovid
>
> -----Original Message-----
> From: Asad Raza <[email protected]>
> Sender: "juniper-nsp" <[email protected]>Date: Wed, 18 Feb
> 2015 10:23:54
> To: Harri Makela<[email protected]>
> Cc: <[email protected]>
> Subject: Re: [j-nsp] Comments display (annote command) via show command !!
>
> Hi,
>
> Show configuration in operational mode (without display set) displays the
> comments.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
