Of course for looking at configs. We use display set when we backup and diff the config files for any changes. I wish comments would be in display set as we'll...
Regards, Dovid -----Original Message----- From: Chris Kawchuk <[email protected]> Date: Thu, 19 Feb 2015 16:31:30 To: [email protected]<[email protected]> Cc: Asad Raza<[email protected]>; juniper-nsp<[email protected]>; Harri Makela<[email protected]>; <[email protected]> Subject: Re: [j-nsp] Comments display (annote command) via show command !! I highly suggest always using the normal "show configuration" commands, as you'd also miss things like this in your lo0.0 filter: term block-ntp { from { protocol udp; ## ## Warning: statement ignored: unsupported platform (ex4550-32f) ## port ntp; } then { discard; } } ^^ and my guys wondered why local DNS requests and SNMP polls didn't work for a week....... - Ck. On 19/02/2015, at 12:12 AM, Dovid Bender <[email protected]> wrote: > Afaik it never shows in display set because comments aren't entered with set. > > Regards, > > Dovid > > -----Original Message----- > From: Asad Raza <[email protected]> > Sender: "juniper-nsp" <[email protected]>Date: Wed, 18 Feb > 2015 10:23:54 > To: Harri Makela<[email protected]> > Cc: <[email protected]> > Subject: Re: [j-nsp] Comments display (annote command) via show command !! > > Hi, > > Show configuration in operational mode (without display set) displays the > comments. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
