Colleagues, I hope I am not asking something unusual? I just want to classify frames based solely on the ingress port and pass these frames out the trunk ports keeping the CoS value.
I have read about rewriting rules and classifiers, but would be really grateful for a simple example. Victor Sudakov wrote: > Colleagues, > > I have the following configuration on some Cisco switches, e.g. > > interface GigabitEthernet0/10 > switchport access vlan XXX > switchport mode access > mls qos cos 6 > mls qos cos override > ! > > How do I do the same on a Juniper EX4200 switch, namely force a 802.1p > CoS value on all ingress frames incoming via a certain access port > and keep this value when these frames leave the EX4200 switch via a > trunk port? > > I don't need to modify Juniper queues or anything sophisticated. I > just need to classify frames and pass the classified frames to the > communications equipment which understands CoS bits. > > Thank you in advance for any input. > > -- > Victor Sudakov, VAS4-RIPE, VAS47-RIPN > sip:[email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- Victor Sudakov Tomsk, Russia Russian Barefoot FAQ at http://www.barefooters.ru/barefoot.txt _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
