Mark Tinka wrote: > > > > Oh, but I was talking about 802.1p CoS, not about IP and dscp. And > > the interfaces I need to classify incoming frames on are configured as > > "family ethernet-switching port-mode access", not as "family inet". > > > > The good thing is that when an EX4200 receives a frame with a > > non-default CoS via a trunk port, it does not stip or alter it, but > > just passes it on via the egress trunk port. Now I need to classify > > frames coming via access ports. > > Policy Map also supports 802.1p, but on the MX. > > Ingress marking on any other Juniper platform is not supported. You can > only mark/re-mark on egress, which is why we pushed Cisco to develop > Policy Map, given how limiting egress marking is.
All right, if I have Internet traffic in VLAN10 and video cameras in VLAN20, how do I mark on egress frames belonging to VLAN20 with CoS=1 and those belonging to VLAN20 with CoS=4 ? -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN sip:[email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
