loopbacks On 7/2/15, 4:25 PM, "juniper-nsp on behalf of Levi Pederson" <[email protected] on behalf of [email protected]> wrote:
>All, > >I've created simpler MPLS ring between a total of 6 MPLS 4550s. My >questions what IP do I use for the Label Switched Path Endpoints. I can't >seem to find a "best practice." > >Specifically this code > >Obfuscated as I'm a little to literal with my descriptions > >set protocols mpls label-switched-path PE2-to-PE1 to 10.254.1.1 >set protocols mpls label-switched-path PE2-to-PE3 to 10.254.1.6 >set protocols mpls label-switched-path PE2-to-PE4 to 10.254.0.4 > > >Do I use the /30 that exists between the Legs? > >Or should I use the LoopBack0 ? > >My thought would be Leg itself as it creates the path. But some documents >state LoopBack. > > >Thank you, > >*Levi Pederson* >Mankato Networks LLC >cell | 612.481.0769 >work | 612.787.7392 >[email protected] >_______________________________________________ >juniper-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
