> -----Original Message-----
> Eric Van Tol
> Sent: 08 July 2015 10:34
> unit 10004 {
> description "To Port-Based EoMPLS";
> encapsulation vlan-ccc;
> vlan-id 2123;
> input-vlan-map pop;
> output-vlan-map push;
> family ccc;
> }
Just a side note
To do the above you'd need to enable flexible-vlan-tagging under the main
interface (please note it will increase the MTU by 8B to MTU mismatch may
happen preventing the L2circuit to come up).
adam
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
