All, I've setup an MPLS ring and with your help it's running beautifully. With it I can easily make port congruence across the MPLS ring with few issues. For example send a single from one side of the MPLS ring to the other if the signal lands on a port directly. I.E a physical interface.
Where I'm having trouble now is landing or starting from a logical interface such as a VLAN. For example. I'm receiving the signal onto a port on PE1 and I need to Add it to a Trunk Port which is also an aggregate link (ae0 say VLAN 3999). Each router currently holds only 1 switched path to each other PE (3 LSPs per device) 4 Devices total. My thoughts were to use this http://www.juniper.net/documentation/en_US/junos14.1/topics/task/configuration/mpls-l2-circuit-cli.html#jd0e171 That turned out to be incorrect or at least I did something that did not agree with he system. My l2circuit attempts seem to not pull up when attempted. Any help or direction would be appreciated. I'm not looking for massive l2VPN or anything like that just the simpler l2circuit I can provide a diagram and documents for those with a serious request to help. Thank you, *Levi Pederson* Mankato Networks LLC cell | 612.481.0769 work | 612.787.7392 [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
