Scott, I was under the assumption you wanted to zerorize and remove a unit from a Virtual Chassis. Hence the use of system zeorize.
If you wanted to completely erase and re-setup a new VC with old members of a previous that is a different story. I think you issue might be process related. I would erase and and pre-setup (partially) the first switch in the NEW VC with no VC cables attached. Then connect the VC cables and power on the next member (previously zeroized). That should bring up the VC between the two devices. The other option would be to statically assign the VC nodes using the serial numbers. Thank you, *Levi Pederson* Mankato Networks LLC cell | 612.481.0769 work | 612.787.7392 [email protected] On Mon, Aug 17, 2015 at 12:33 PM, Scott Granados <[email protected]> wrote: > Hi Ross, I had tried this but still no link. I believe I have a hardware > problem at work causing the vc ports not to link. Zeroize seemed to do the > trick but with out connectivity I’m Dead in the water. Time to RMA I think. > > Thanks > Scott > > > On Aug 17, 2015, at 1:20 PM, Ross Halliday < > [email protected]> wrote: > > > > Since you want to nuke the config anyway, break the switch out of the VC > and use > > > > request system zeroize > > > > You may want to assign the soon-to-be-former member an RE role, if it's > not an automatically elected cluster, just to make things a little easier. > > > > Cheers > > Ross > > > > > > -----Original Message----- > > From: juniper-nsp [mailto:[email protected]] On > Behalf Of Scott Granados > > Sent: Thursday, August 13, 2015 9:23 PM > > To: juniper-nsp > > Subject: [j-nsp] Breaking an EX cluster? > > > > Hi, > > Have some EX 4300s that I want to break apart and start like they were > factory new and reboot. I know about the factory default button on the > front and the configuration option but no matter how I apply that I still > have the node boot thinking it’s a member of the previous chassis. How do > I delete it’s membership when it’s active / a stand alone node? > > > > Any pointers are most appreciated. > > > > Thank you > > Scott > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
