> -----Original Message----- > From: juniper-nsp [mailto:[email protected]] On Behalf Of > Jérôme Nicolle > Sent: Thursday, December 31, 2015 12:20 PM > To: [email protected] > Subject: Re: [j-nsp] EX4200 console port woes > > The default console speed on the EX4200 is 9600bauds, as stated here : > > http://www.juniper.net/techpubs/en_US/release-independent/junos/information- > products/topic-collections/hardware/ex-series/ex3200-4200/topic-42349.html > > Eric's settings looks fine, unless he missed a change in console speed > configuration.
Correct, but I did try different speeds just as a test, with no change. It *does* mimic a speed issue, though. Tried other ports, other EX switches, other cables. There seems to be something specific with the EX console port that this MRV does not like. Again, the problem does not appear to be the console port itself, as it works perfectly when I access it by other means. And again, I can simply move the cable into any other device that isn't an EX switch and I get proper communication on that port. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
