4 High Output AC supplies, only 3 16x10Gbps cards installed with no optics in them yet
Power is okay, it's not doing anything yet :P Good idea though! On Fri, Feb 26, 2016 at 2:14 PM, Chuck Anderson <[email protected]> wrote: > Not enough power to power up the card? > > show chassis power > > On Fri, Feb 26, 2016 at 01:50:44PM -0600, Josh Reynolds wrote: >> Hi all. >> >> Pair of MS-MPC-128's. 1st card boots, second card doesn't. Swapped FPC >> locations, now the 2nd card boots in the first card's spot, but the >> 1st card won't boot in the previous spot of the 2nd card. Have tried >> several other slots for the 2nd card the with same results. >> >> show chassis hardware recognizes the MS-MPC-128 is installed, but no >> power. request chassis fpc online slot X shows: "Online initiated, use >> "show chassis fpc" to verify", but "show chassis fpc" still shows it's >> powered off. >> >> What gives? >> >> Thanks _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
