The PS are in high power mode ? Position 0 Sent from my iPhone
> On Feb 26, 2016, at 17:19, Josh Reynolds <[email protected]> wrote: > > 4 High Output AC supplies, only 3 16x10Gbps cards installed with no > optics in them yet > > Power is okay, it's not doing anything yet :P Good idea though! > >> On Fri, Feb 26, 2016 at 2:14 PM, Chuck Anderson <[email protected]> wrote: >> Not enough power to power up the card? >> >> show chassis power >> >>> On Fri, Feb 26, 2016 at 01:50:44PM -0600, Josh Reynolds wrote: >>> Hi all. >>> >>> Pair of MS-MPC-128's. 1st card boots, second card doesn't. Swapped FPC >>> locations, now the 2nd card boots in the first card's spot, but the >>> 1st card won't boot in the previous spot of the 2nd card. Have tried >>> several other slots for the 2nd card the with same results. >>> >>> show chassis hardware recognizes the MS-MPC-128 is installed, but no >>> power. request chassis fpc online slot X shows: "Online initiated, use >>> "show chassis fpc" to verify", but "show chassis fpc" still shows it's >>> powered off. >>> >>> What gives? >>> >>> Thanks > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
