Good !!! Lets share here on this list any new details about configuration, ok ?
Are you using D50 version ? It is pretty stable right now to us. But we are asking for the development a lot of new features and they are listening to us. Thanks a lot, Att, Giuliano Giuliano Cardozo Medalha Systems Engineer +55 (17) 3011-3811 +55 (17) 98112-5394 JUNIPER J-PARTNER ELITE [email protected] http://www.wztech.com.br/ WZTECH is registered trademark of WZTECH NETWORKS. Copyright © 2016 WZTECH NETWORKS. All Rights Reserved. IMPORTANTE: As informações deste e-mail e o conteúdo dos eventuais documentos anexos são confidenciais e para conhecimento exclusivo do destinatário. Se o leitor desta mensagem não for o seu destinatário, fica desde já notificado de que não poderá divulgar, distribuir ou, sob qualquer forma, dar conhecimento a terceiros das informações e do conteúdo dos documentos anexos. Neste caso, favor comunicar imediatamente o remetente, respondendo este e-mail ou telefonando ao mesmo, e em seguida apague-o. CONFIDENTIALITY NOTICE: The information transmitted in this email message and any attachments are solely for the intended recipient and may contain confidential or privileged information. If you are not the intended recipient, any review, transmission, dissemination or other use of this information is prohibited. If you have received this communication in error, please notify the sender immediately and delete the material from any computer, including any copies. On Tue, Jun 21, 2016 at 3:24 PM, Aaron <[email protected]> wrote: > > > Hey , that worked , thanks ! seems that I have to do it at the unit > level, I didn’t see that I could do it on the phy int level. > > > > {master:0} > > agould@blcn-h-5048> show interfaces ge-0/0/36 | grep pack > > Input packets : 33 > > Output packets: 0 > > > > {master:0} > > agould@blcn-h-5048> show interfaces ge-0/0/36 | grep pack > > Input packets : 33 > > Output packets: 0 > > > > {master:0} > > agould@blcn-h-5048> show interfaces ge-0/0/36 | grep pack > > Input packets : 33 > > Output packets: 0 > > > > {master:0} > > agould@blcn-h-5048> show interfaces ge-0/0/36 | grep pack > > Input packets : 33 > > Output packets: 0 > > > > {master:0} > > agould@blcn-h-5048> show interfaces ge-0/0/36 | grep pack > > Input packets : 33 > > Output packets: 0 > > > > {master:0} > > agould@blcn-h-5048> configure > > Entering configuration mode > > > > {master:0}[edit] > > agould@blcn-h-5048# set interfaces ge-0/0/36 unit 0 statistics > > > > {master:0}[edit] > > agould@blcn-h-5048# commit > > configuration check succeeds > > commit complete > > > > {master:0}[edit] > > agould@blcn-h-5048# exit > > Exiting configuration mode > > > > {master:0} > > agould@blcn-h-5048> show interfaces ge-0/0/36.0 | grep pack > > Input packets : 18232 > > Output packets: 2 > > > > {master:0} > > agould@blcn-h-5048> show interfaces ge-0/0/36.0 | grep pack > > Input packets : 20857 > > Output packets: 2 > > > > > > > > > > > > *From:* Giuliano Medalha [mailto:[email protected]] > *Sent:* Monday, June 20, 2016 4:40 PM > *To:* Aaron <[email protected]> > *Cc:* Nathan Ward <[email protected]>; jnsp list < > [email protected]> > *Subject:* Re: [j-nsp] ACX50xx l2circuit counters > > > > Hum ... I think in ACX you will need to explicit use statistics command ... > > set interfaces xe-0/0/1 statistics > > > Giuliano Cardozo Medalha > Systems Engineer > +55 (17) 3011-3811 > > +55 (17) 98112-5394 > JUNIPER J-PARTNER ELITE > [email protected] > http://www.wztech.com.br/ > > > > > WZTECH is registered trademark of WZTECH NETWORKS. > Copyright © 2016 WZTECH NETWORKS. All Rights Reserved. > > IMPORTANTE: > As informações deste e-mail e o conteúdo dos eventuais documentos anexos > são confidenciais e para conhecimento exclusivo do destinatário. Se o > leitor desta mensagem não for o seu destinatário, > fica desde já notificado de que não poderá divulgar, distribuir ou, sob > qualquer forma, dar conhecimento a terceiros das informações e do conteúdo > dos documentos anexos. Neste caso, favor comunicar imediatamente > o remetente, respondendo este e-mail ou telefonando ao mesmo, e em seguida > apague-o. > > > CONFIDENTIALITY NOTICE: > > The information transmitted in this email message and any attachments are > solely for the intended recipient and may contain confidential or > privileged information. If you are not the intended recipient, any review, > transmission, dissemination or other use of this information is > prohibited. If you have received this communication in error, please notify > the sender immediately and delete the material from any computer, including > any copies. > > > > On Mon, Jun 20, 2016 at 6:37 PM, Aaron <[email protected]> wrote: > > Yeah, strange my subinterface doesn't show any packets out, but the phy > int shows currently 17 mbps going out right now... > > Maybe these counters are broken on the subint... I tried walking with snmp > but I still didn't see any traffic for the subinterface used on the > l2circuit > > agould@blcn-h-5048> show interfaces ge-0/0/12 statistics > Physical interface: ge-0/0/12, Enabled, Physical link is Up > Interface index: 650, SNMP ifIndex: 521 > Link-level type: Ethernet-CCC, MTU: 1514, LAN-PHY mode, Speed: 1000mbps, > BPDU Error: None, MAC-REWRITE Error: None, Loopback: Disabled, > Source filtering: Disabled, Flow control: Disabled, Auto-negotiation: > Enabled, Remote fault: Online, Media type: Copper > Device flags : Present Running > Interface flags: SNMP-Traps Internal: 0x4000 > Link flags : None > CoS queues : 8 supported, 8 maximum usable queues > Current address: 20:4e:71:45:12:34, Hardware address: 20:4e:71:45:12:34 > Last flapped : 2016-05-25 14:38:24 CDT (3w5d 01:55 ago) > Statistics last cleared: Never > Input rate : 17802616 bps (1633 pps) > Output rate : 0 bps (0 pps) > Input errors: 0, Output errors: 0 > Active alarms : None > Active defects : None > Interface transmit statistics: Disabled > > Logical interface ge-0/0/12.0 (Index 557) (SNMP ifIndex 523) > Flags: Up SNMP-Traps 0x4004000 Encapsulation: Ethernet-CCC > Input packets : 68 > Output packets: 0 > Protocol ccc, MTU: 1514 > Flags: Is-Primary > > {master:0} > > agould@blcn-h-5048> show l2circuit connections brief > Layer-2 Circuit Connections: > > Legend for connection status (St) > .... > > Legend for interface status > Up -- operational > Dn -- down > Neighbor: 10.101.0.1 > Interface Type St Time last up # Up trans > ge-0/0/12.0(vc 1) rmt Up May 25 14:38:24 2016 1 > > > - Aaron > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
