On Tue 2016-Jul-05 13:23:38 -0500, Josh Reynolds <[email protected]> wrote:
EX4500
This would be done with flexible-ethernet-services on MX, but I don't believe it's supported to mix L2 and L3 on the same port on the EX4500. We've tried that on 4550, and you can't mix family ethernet-switching with e.g. vlan-tagging, which is what you would use for your L3 unit.
You could change the interface into a trunk, run your existing access vlan as native, and create an RVI for your L3 interface, but that may or may not cut it depending on what you need that L3 interface for.
-- Hugo Slabbert | email, xmpp/jabber: [email protected] pgp key: B178313E | also on Signal
On Tue, Jul 5, 2016 at 1:20 PM, Hugo Slabbert <[email protected]> wrote:On Tue 2016-Jul-05 13:17:52 -0500, Josh Reynolds <[email protected]> wrote:Hello, I'm sure this is a fairly basic question, but I'm having trouble finding a solution. I have a port that is currently an ethernet switching port, set in access mode that is tagging a vlan for upstream. This works fine. What I'd like to do, is add a sub interface on the master port (say, unit 600 / vlan 600) that is a tagged/routed interface. I've tried to do this a couple of ways now, and every time I seem to get thrown a different error. Anybody have any tips?Support for this varies depending on what platform you are using. You haven't told us what equipment you're talking about.Thanks :)
signature.asc
Description: Digital signature
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
