Thanks Hugo, I'll try and give that a shot. So basically setup an ethernet-switching interface on unit 0, port mode trunk, native vlan as the current access vlan, member list includes the new vlan? I think I'm confused about how I would assign an RVI to this in that state.
Do you have a quick example config I might be able to work off of? Thank you! On Tue, Jul 5, 2016 at 1:32 PM, Hugo Slabbert <[email protected]> wrote: > > On Tue 2016-Jul-05 13:23:38 -0500, Josh Reynolds <[email protected]> > wrote: > >> EX4500 > > > This would be done with flexible-ethernet-services on MX, but I don't > believe it's supported to mix L2 and L3 on the same port on the EX4500. > We've tried that on 4550, and you can't mix family ethernet-switching with > e.g. vlan-tagging, which is what you would use for your L3 unit. > > You could change the interface into a trunk, run your existing access vlan > as native, and create an RVI for your L3 interface, but that may or may not > cut it depending on what you need that L3 interface for. > > > -- > Hugo Slabbert | email, xmpp/jabber: [email protected] > pgp key: B178313E | also on Signal > >> >> On Tue, Jul 5, 2016 at 1:20 PM, Hugo Slabbert <[email protected]> wrote: >>> >>> >>> On Tue 2016-Jul-05 13:17:52 -0500, Josh Reynolds <[email protected]> >>> wrote: >>> >>>> Hello, >>>> >>>> I'm sure this is a fairly basic question, but I'm having trouble >>>> finding a solution. >>>> >>>> I have a port that is currently an ethernet switching port, set in >>>> access mode that is tagging a vlan for upstream. This works fine. What >>>> I'd like to do, is add a sub interface on the master port (say, unit >>>> 600 / vlan 600) that is a tagged/routed interface. >>>> >>>> I've tried to do this a couple of ways now, and every time I seem to >>>> get thrown a different error. >>>> >>>> Anybody have any tips? >>> >>> >>> >>> Support for this varies depending on what platform you are using. You >>> haven't told us what equipment you're talking about. >>> >>>> Thanks :) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
