Hello,
Check Your laser light levels :
show interfaces diagnostics optics ge-x/y/z
HTH
Thx
Alex
On 05/03/2017 10:51, Mohammad Khalil wrote:
As well , I have checked the log messages , and I can see the below message:
RPD_ISIS_ADJDOWN : ISIS lost L2 adjacency reason 3-way handshake
BR,
Mohammad
On 5 March 2017 at 12:24, Mohammad Khalil <[email protected]> wrote:
Hi
I have removed the whole filter from the lo0 interface and the same applies
BR,
Mohammad
On 5 March 2017 at 12:03, <[email protected]> wrote:
I have a BFD session between two routers (which was working normally)
Currently , the session is down from one side and init from the other
side
The ISIS adjacency is up
What could be the issue?
Check if you you have firewall filter on lo0 which blocks UDP port 3784
or 3785.
Steinar Haug, Nethelp consulting, [email protected]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
