admin@CR02# run show interfaces diagnostics optics ge-2/1/0
Physical interface: ge-2/1/0
Optical diagnostics : N/A
On 5 March 2017 at 13:23, Alexander Arseniev <[email protected]>
wrote:
> Hello,
>
> Check Your laser light levels :
>
> show interfaces diagnostics optics ge-x/y/z
>
> HTH
>
> Thx
> Alex
>
> On 05/03/2017 10:51, Mohammad Khalil wrote:
>
> As well , I have checked the log messages , and I can see the below message:
> RPD_ISIS_ADJDOWN : ISIS lost L2 adjacency reason 3-way handshake
>
> BR,
> Mohammad
>
> On 5 March 2017 at 12:24, Mohammad Khalil <[email protected]>
> <[email protected]> wrote:
>
>
> Hi
> I have removed the whole filter from the lo0 interface and the same applies
>
> BR,
> Mohammad
>
> On 5 March 2017 at 12:03, <[email protected]> <[email protected]> wrote:
>
>
> I have a BFD session between two routers (which was working normally)
> Currently , the session is down from one side and init from the other
>
> side
>
> The ISIS adjacency is up
> What could be the issue?
>
> Check if you you have firewall filter on lo0 which blocks UDP port 3784
> or 3785.
>
> Steinar Haug, Nethelp consulting, [email protected]
>
> _______________________________________________
> juniper-nsp mailing list
> [email protected]https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
