There is no such way to "test before apply " in Cisco. Thats one reason to choose Juniper ;) You could Create a Lab-Environment to test such things or test this virtually with Cisco VIRL. Besides that there is no way because as you wrote - Cisco will take everything and fires it live... RegardsChris
-------- Ursprüngliche Nachricht --------Von: Brijesh Patel <[email protected]> Datum: 21.03.17 22:13 (GMT+01:00) An: Saku Ytti <[email protected]> Cc: [email protected] Betreff: Re: [j-nsp] It is about cisco command Hi Saku, Thanks for your response. In juniper* test *command will test before apply to neighbour Where in cisco , once you implement command go into nvram so bit not give answer. Regards, Brijesh Patel On Tue, Mar 21, 2017 at 8:00 PM, Saku Ytti <[email protected]> wrote: > Hey, > > > *Juniper>test policy CUSTOMER-BGP-ABC-Consultancy-V4 192.168.x.y/24 * > > > > *Is there any command in cisco to test roue-map and prefix-list. * > > Pretty sure best you get is 'show ip bgp route-map XYZ' > > -- > ++ytti > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
