Chuck,
Could you please share portion of your QinQ configuration? In my tests, facing customer side, used: set vlans S-VLAN-200 vlan-id 200 set vlans S-VLAN-200 interface ge-0/0/14.200 set interfaces ge-0/0/14 flexible-vlan-tagging set interfaces ge-0/0/14 native-vlan-id 200 set interfaces ge-0/0/14 mtu 6000 set interfaces ge-0/0/14 encapsulation extended-vlan-bridge set interfaces ge-0/0/14 unit 200 vlan-id-list 10-30 set interfaces ge-0/0/14 unit 200 input-vlan-map push set interfaces ge-0/0/14 unit 200 output-vlan-map pop Even you can encapsulates customer vlan inside a service vlan, all layer 2 protocols will not pass. ________________________________________ De: juniper-nsp [[email protected]] em nome de Chuck Anderson [[email protected]] Enviado: sexta-feira, 24 de março de 2017 18:33 Para: [email protected] Assunto: Re: [j-nsp] RES: QFX 5100 and Q-in-Q I had to load 14.1X53-D40 to have a basic working Q-in-Q config. D35 was broken in some fundamental way. On Fri, Mar 24, 2017 at 04:31:56PM +0000, Alexandre Guimaraes wrote: > Alain, > > As far i know, QinQ - L2TP does not work at QFX5100. > > Att., > Alexandre > > ________________________________________ > De: juniper-nsp [[email protected]] em nome de Alain Hebert > [[email protected]] > Enviado: sexta-feira, 24 de março de 2017 13:07 > Para: [email protected] > Assunto: [j-nsp] QFX 5100 and Q-in-Q > > Well, > > We're having all sort of massive failure making Q-in-Q works in our > QFX5100 in standard and VCF mode... and that with 14.x, 15x, 16.x, 17.x > > Such a simple thing should not take 1 week of back & forth with JTAC. > > Anyone have some experience to share on that subject? > > Thank. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
