Hi,
Thank you for the feedback.
I'll have to confirm with the other engineer, but for sure, with
14.1X53-D42.3, PVST+ is not working.
Packets comes out untagged at the other end :(
Even with the knob documented in JunOS for QFX5100.
-----
Alain Hebert [email protected]
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
On 03/24/17 17:33, Chuck Anderson wrote:
I had to load 14.1X53-D40 to have a basic working Q-in-Q config. D35
was broken in some fundamental way.
On Fri, Mar 24, 2017 at 04:31:56PM +0000, Alexandre Guimaraes wrote:
Alain,
As far i know, QinQ - L2TP does not work at QFX5100.
Att.,
Alexandre
________________________________________
De: juniper-nsp [[email protected]] em nome de Alain Hebert
[[email protected]]
Enviado: sexta-feira, 24 de março de 2017 13:07
Para: [email protected]
Assunto: [j-nsp] QFX 5100 and Q-in-Q
Well,
We're having all sort of massive failure making Q-in-Q works in our
QFX5100 in standard and VCF mode... and that with 14.x, 15x, 16.x, 17.x
Such a simple thing should not take 1 week of back & forth with JTAC.
Anyone have some experience to share on that subject?
Thank.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
