MPLS is now supported on IRB on QFX5100: https://www.juniper.net/documentation/en_US/junos/topics/reference/general/mpls-limitations-qfx-series.html#jd0e57
On Fri, Oct 27, 2017 at 3:50 PM, Andrey Kostin <[email protected]> wrote: > Chris Wopat писал 25.10.2017 13:00: > >> On 10/24/2017 05:30 PM, Vincent Bernat wrote: >> >>> ❦ 24 octobre 2017 14:29 -0400, Andrey Kostin <[email protected]> : >>> >>> > Straight up saying "don't put public IPs on them" doesn't seem like >> the best advice to me. You can certainly do this, we do and it's fine. >> When you craft your RE protection filter you just have to squeeze a >> bit more space here or there compared to say, an MX filter. You should >> have this enabled weather you're using public IPs or not. >> >> Regarding TCAM programming, it's loud and clear when this happens via >> a console message and a sev0 syslog message. >> > > Yes, that's true, and we spend a decent amount of time packing lo0 filters > in a tiny TCAM after discovered that filter input-list silently allows > everything except the first filter and doesn't generate any complaint. > So, no objection for public IPs but only careful filter planning required. > > -- > Kind regards, > Andrey > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
