> Scott Harvanek > Sent: Tuesday, October 31, 2017 6:57 PM > > Hey folks, > > We have some MX480s we need to add queuing capable 10G/40G ports to > and it looks like MPC5EQ-40G10G is going to be our most cost effective > solution. Has anyone run into any limitations with these MPCs that aren’t > clearly documented? > > We intend to use them for L3/VLAN traffic w/ CoS/Shaping. Currently we’re > doing that on MPC2E NG Qs w/ 10XGE-SFPP MICs , any reason we couldn’t > do the same on this along with the adding of the 40G ports? Any Layer3 > limitations or the normal 2MM/6MM FIB/RIB? > Hey Scott, I'd rather go with a standard Trio architecture i.e. one lookup block one buffering block (and one queuing block) -so mpc3 or mpc7. To me it seems like 4 and 5 are just experiments with the Trio architecture that did not stood the test of time.
adam _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
