David, Thanks for pointing that out, I did read that and understand the available options/limitations between the 10G/40G interfaces. :)
Scott H > On Nov 1, 2017, at 11:34 AM, Hunter, David B. <[email protected]> wrote: > > Scott, > > Just FYI, you may already be aware of this, but there was one limitation with > the MPC5E that we ran into. We use the MPC5E-40G10G, which are working fine > in our data center for 40Gbs service. I think the EQ version is the same in > regards to the limitation we discovered. At the time we purchased the cards, > it wasn’t well documented as to how the 10 and 40Gbs ports could be used. > Juniper has since updated the documentation to specify the allowed port usage. > > The card is not oversubscribed, the limit seems to be a hard 240Gbs for the > entire card imposed by the way in which the PICs can be used. > > https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/mpc5eq-6x40ge-24x10ge.html > > <https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/mpc5eq-6x40ge-24x10ge.html> > > “...Supports one of the following port combinations: > • Six 40-Gigabit Ethernet ports > • Twenty-four 10-Gigabit Ethernet ports > • Three 40-Gigabit Ethernet ports and twelve 10-Gigabit Ethernet ports” > > Also see: > > https://www.juniper.net/documentation/en_US/junos/topics/reference/general/active-pics-mpc5e-guidelines.html > > <https://www.juniper.net/documentation/en_US/junos/topics/reference/general/active-pics-mpc5e-guidelines.html> > > David B. Hunter > IU Network Design Engineer > Indiana University > 317-278-4873 > [email protected] > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
