Hey Martin, I don't follow you, the 'column' names are not needed, as they are in the tags?.
[email protected]> show ipv6 neighbors IPv6 Address Linklayer Address State Exp Rtr Secure Interface fe80::290:69ff:fefb:b7f3 00:90:69:fb:b7:f3 reachable 12 yes no ae4.0 [email protected]> show ipv6 neighbors |display xml <ipv6-nd-neighbor-address>fe80::290:69ff:fefb:b7f3</ipv6-nd-neighbor-address> <ipv6-nd-neighbor-l2-address>00:90:69:fb:b7:f3</ipv6-nd-neighbor-l2-address> <ipv6-nd-state>stale</ipv6-nd-state> <ipv6-nd-expire>1197</ipv6-nd-expire> <ipv6-nd-isrouter>yes</ipv6-nd-isrouter> <ipv6-nd-issecure>no</ipv6-nd-issecure> <ipv6-nd-interface-name>ae4.0</ipv6-nd-interface-name> Same information from my POV? Maybe you'll prefer '|display json', which happens to be only format JunOS supports which supports 'annotate' reasonably. Hopefully JNPR will backport the JSON style annotate support to XML presentation. On 6 March 2018 at 18:54, Martin T <[email protected]> wrote: > Hi! > > I have noticed that certain commands executed on CLI provide some > additional information over corresponding RPCs. For example "show ipv6 > neighbors" or "show system storage" on CLI show column names while XML > output does not contain this data. Why is that so? > > > thanks, > Martin > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- ++ytti _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
