Thanks Aaron!!! That fixed the mac issue I was facing, that was a really good idea!
I had a pending issue with pings but was able to resolve that by adding the below to both of my PE's. set logical-systems PE2 routing-instances SPRINT vlan-id none Once that was done all of my pings worked as expected. Thanks again Aaron for taking time to take a look at it and hopefully this will help someone down the road. ________________________________ From: Aaron Gould <[email protected]> Sent: Tuesday, June 12, 2018 8:37 PM To: 'craig washington'; [email protected] Subject: RE: [j-nsp] Logical Systems with VPLS using only lt interfaces Hi Craig, I had similar issues when labbing using Lsys combined with Layer 2 types of things like martini l2circuits and vpls... I think it has something to do with the way lsys logical tunnel interfaces assign their mac/hardware address... I did solve this a couple different ways... When I initially only had one tunnel-service configured, then I created more lt interfaces and saw that there was an alternating mac address assigned... so , you just have to make sure you use the *different* mac address for the L2 endpoints so they don't conflict. But later I learned to simply add another tunnel-service to my mx104 lsys environment, then this made it even more likely that I would have a different mac address... [edit] gvtc@lab-mx104# show chassis | display set set chassis fpc 0 pic 1 tunnel-services set chassis fpc 1 pic 1 tunnel-services [edit] gvtc@lab-mx104# run show interfaces lt-0/1/0 | grep "MAC|Hard" Current address: 30:b6:4f:68:70:a9, Hardware address: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:aa MAC: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:aa MAC: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:aa MAC: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:aa MAC: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:aa MAC: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:a9 MAC: 30:b6:4f:68:70:a9 .... [edit] gvtc@lab-mx104# run show interfaces lt-1/1/0 | grep "MAC|Hard" Current address: 30:b6:4f:68:73:4e, Hardware address: 30:b6:4f:68:73:4e -Aaron _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
