Y'all can safely ignore that.
Someone punched in a lo0.1 without inet6 input-filter and it was
bypassing it through a routing-instance which was unused.
PS: Diogo, yeah did all that nice stuff while scratching my head
for an hour until I noticed someone had fat fingers. Thx for the follow up.
-----
Alain Hebert [email protected]
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
On 07/09/18 15:58, Alain Hebert wrote:
Pretty basic box (beside boost in capacity and REs).
MX104 - Junos: 16.1R4-S1.3
MX960 - Junos: 16.1R7.7
And yet the same "firewall family inet6" "lo0.0 family inet6
filter-list [ ... ]" from the MX104 refuse to work on the MX960...
I have yet to find the hidden knot from Juniper about the MX960
and RE protect firewalling for inet6.
PS: Works without issue for IPv4.
Any hints?
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
